LawnPro Smart Lawn Seed

Active Ingredients

Contains a blend of creeping red fescue and perennial turf ryegrass seed with seed starter fertilisers and soil conditioner.

Available Sizes

• 1kg shaker pack (SKU: G42100)
• 1.6kg shaker pack (SKU: G42105)
• 4kg spreader bag (SKU: G42110)

Available at:

1kg

1.6kg

4kg

Regulations

HSNO Approval Code: HSR002571
LawnPro Smart Lawn Seed SDS

New lawns:

1. Firstly prepare the soil by clearing away any debris. Treat the area with Weed Weapon Extra Strength weed killer and dig out any perennial weeds.
2. Once the soil is clear of weeds, prepare a seedbed: on a dry day, dig over the soil to a depth of 20 – 25cm. Break down any lumps and tread the soil to firm it again. Level out any bumps or hollows using a rake, aiming to create a flat, even surface.
3. The day before sowing, water thoroughly if the soil is dry and leave to soak in overnight.
4. TIP – The top of the soil should be dry with moist soil just below the surface on the day of sowing.

Existing lawns:

1. Remove any weeds either by hand or by using LawnPro Turfclean.
2. Once weeds are dead, mow the lawn closely before raking or scarifying to remove any moss and weed remains.
3. If the ground appears hard or compacted, aerate using a garden fork and rake over to make sure the ground is level.
4. Finally, spread soil to fill any shallow holes and level out the surface.

Sowing:

1. Shake the box of seed thoroughly to mix up the seeds.
2. Tear back the strip to expose the applicator holes and to sprinkle the seeds.
3. Apply the seed at a rate of 40g / m²  for lawn repairs). As a guide, one large handful is approximately 40g.
4. Sprinkling the seed in 2 passes at right angles to each other will help spread the seed more uniformly. Lightly rake to gently incorporate the seed into the surface.

After Sowing:

1. The ground should be rolled or lightly firmed by walking over it and pressing the seed into the soil.
2. Water the lawn thoroughly using a fine-rosed watering can or a lawn sprinkler which produces a fine spray, taking care not to wash the seeds away.
3. Grass can be cut for the first time when it is 5 – 8cm high. A light trim will be sufficient initially. Gradually lower the cutting height to about 3cm, which is ideal. Do not remove more than 1/3 of the growth at any one time.

LawnPro Smart Lawn Seed Technical Sheet

• Keep out of reach of children.
• Store in a cool dry place, out of direct sunlight and use within season of purchase.
• Please follow cautionary labels and safety instructions located on the product packaging.

Safe disposal of containers and chemicals

Safe storage of home and garden products

For best results

When to sow:

• Lawn seed may be sown from Sep – Jun. However, for best results, sow in spring from Sep – Oct, and in early autumn from mid–March to mid–April.
• These recommendations should be adjusted to the warmer end of these periods for more southerly areas.
  If sowing a new lawn in very hot conditions the lawn should be watered late in the day once the sun has gone down. It is better to water thoroughly once rather than several times lightly.
• Don't apply more seed per square metre than recommended on the pack. Applying higher rates causes the competition between the young grass and encourages disease due to damping off.
• Alternating the direction of the mowing (e.g. north – south then east – west) encourages the lawn to thicken.
• Store in a cool dry place, out of direct sunlight and use within season of purchase.

Download your Kiwicare Lawn Maintenance Calendar

Tips & tricks for maintaining a healthy lawn in NZ

When to sow grass seed

Glossary of gardening terms

Lawn Care Guide